Zipato Mini Keypad RFID/Z-Wave - Adding

Device can use up to 20 codes, RFID reader inside, 1 RFID Key tag included, could be used within a security widget and rule creator, Z-Wave. Mini Keypad RFiD/Z-Wave’s indicator light will react differently on each action.

Features of Mini Keypad RFID/Z-Wave:
- Can arm/disarm a security system
- Can read Mini Keypad RFID/ZWave-tags
- Has the possibility for the user to manually insert codes
- Indicator light will react differently on each action

How to add Zipato Mini Keypad RFID?
1. Log in into Zipato Control Center
2. Go to the “Device manager” button on the left sidebar
3. Press “Add new device” button
4. Please find and choose Z-Wave network protocol
5. Exclude (reset) of the device before inclusion (always good prior inclusion process)
- press and hold the tamper for 1 seconds and release to start the exclusion process
6. Include the device
- press and hold the tamper for 1 seconds and release to start the inclusion process
7. Automatic synchronization of data between your Zipato Controller and Zipato Cloud Server will be done
8. Congratulations your Zipato Mini Keypad RFID is added/included on the Zipato Controller

How to add iRFID tag on Zipato Mini Keypad RFID?
1. Go to the “Device manager” button on the left sidebar in Zipato Control Center
2. Find Zipato Mini Keypad RFID in Z-Wave network
3. Go to User Entry (cluster attribute) and click on settings
4. Enter the Event name, User and click on Learn button
5. On Zipato Mini Keypad RFID press Home button and place iRFID tag in front of or on Zipato Mini Keypad
6. In the Zipato Control Center you will get message "Learned successfully"
7. Save and Synchronize at the end

How to add PIN on Zipato Mini Keypad RFID?
1. Go to the “Device manager” button on the left sidebar in Zipato Control Center
2. Find Zipato Mini Keypad RFID in Z-Wave network
3. Go to User Entry (cluster attribute) and click on settings
4. Enter the Event name, User and click on Learn button
5. On Zipato Mini Keypad RFID press Home button and enter 4 digit PIN on Zipato Mini Keypad
6. Press Enter on Zipato Mini Keypad RFID
7. In the Zipato Control Center you will get message "Learned successfully"
8. Save and Synchronize at the end


Tutorial:

Is this article helpful?
3 1 2