This object is in archive!
Basic Question from a Noob. JSJSLW101 Master Switch
Need Answer
Hey guys,
I just got my lovely new Zipato Zipabox ready to install into my renovation project.
The Question is: Master wall switch: http://www.responseelectronics.com/lightwaverf-c2/lightwaverf-wireless-mood-control-master-wall-switch-jsjs-lw101-p515
I planned to use these as basic on/off switches for things like TV, Chromecast Audio etc and to assign each button to a different task. Anyone doing the same can point me in the right direction?
Any help is much appreciated!
Thanks,
The same question Access denied
No connection
Real-time notifications may not work
dont know about these switches sorry, but if they act like a normal remote switch this is possible via the rule creator. For tv use the ir controller or http requests if its a smart tv, but the chromecast is a little harder. There is no Chromecast integration and no api available for this.
dont know about these switches sorry, but if they act like a normal remote switch this is possible via the rule creator. For tv use the ir controller or http requests if its a smart tv, but the chromecast is a little harder. There is no Chromecast integration and no api available for this.
Incase anyone has the same question, yes you can assign each button. Easiest I found was using the rule creator to assign them to tasks.
They come up as 5 usable buttons:
Big on off switches are seen as On/Off Button 1
Left button (power) is Button 4
Button with one dot is Button 1
2 dots Button 2
3 dots Button 3
With regards to the Chromecast part of the question, I have each device set up with a LighwaveRF socket to turn it on when a button is pressed on one of these master switches. It works well.
Incase anyone has the same question, yes you can assign each button. Easiest I found was using the rule creator to assign them to tasks.
They come up as 5 usable buttons:
Big on off switches are seen as On/Off Button 1
Left button (power) is Button 4
Button with one dot is Button 1
2 dots Button 2
3 dots Button 3
With regards to the Chromecast part of the question, I have each device set up with a LighwaveRF socket to turn it on when a button is pressed on one of these master switches. It works well.
Replies have been locked on this page!