possibility to connect ip camera with another port than 80
Completed
I use different ports for all my cameras (ex: externalip:801 for my first camera, externalip:802 for my second, etc...)
like this i can access my cams from anywhere in the world.
to connect my cameras to zipabox we need to use internal ip (192.168.x.x) and all on port80, it will be good to connect with other port else we can't show camera outside our internal network
I like this idea 
No connection
Real-time notifications may not work
Now we added possibility to add camera on any other port manually, when you are adding camera enter your camera IP and port (for example 192.168.1.5:802).
And BTW you can use your cameras from anywhere in the word (without any additional network settings) trough Dashboard because zipato is used as proxy in that case.
Now we added possibility to add camera on any other port manually, when you are adding camera enter your camera IP and port (for example 192.168.1.5:802).
And BTW you can use your cameras from anywhere in the word (without any additional network settings) trough Dashboard because zipato is used as proxy in that case.
I have set all My cameras With internal ip like 10.0.1.x:80 and the NAT them to
different ports externaly. Eg. 192.10.x.x:8080.
Its working fine For me.
I have set all My cameras With internal ip like 10.0.1.x:80 and the NAT them to
different ports externaly. Eg. 192.10.x.x:8080.
Its working fine For me.
Hi,
how did you do to have different ip for internal and external ?
thanks
Hi,
how did you do to have different ip for internal and external ?
thanks
I do not understand your question.
I have fixed ips internal and all cameras to port 80.
Externally they are all NAT to other ports. Like 8080, 8081...
Then I can all locate them using the external ip just to different ports.
I do not understand your question.
I have fixed ips internal and all cameras to port 80.
Externally they are all NAT to other ports. Like 8080, 8081...
Then I can all locate them using the external ip just to different ports.
Now we added possibility to add camera on any other port manually, when you are adding camera enter your camera IP and port (for example 192.168.1.5:802).
And BTW you can use your cameras from anywhere in the word (without any additional network settings) trough Dashboard because zipato is used as proxy in that case.
Now we added possibility to add camera on any other port manually, when you are adding camera enter your camera IP and port (for example 192.168.1.5:802).
And BTW you can use your cameras from anywhere in the word (without any additional network settings) trough Dashboard because zipato is used as proxy in that case.
i did it and it's working ! thanks !
i did it and it's working ! thanks !
Do not work on my zipabox, impossible to add a port number.
the box is red and he told me he does not stand more digit
Do not work on my zipabox, impossible to add a port number.
the box is red and he told me he does not stand more digit
Maximum field length was 15 characters, and now it's set to 20.
Please try to add it now, and don't forget that camera must be on the network that is reachable by your Zipabox.
Maximum field length was 15 characters, and now it's set to 20.
Please try to add it now, and don't forget that camera must be on the network that is reachable by your Zipabox.
Thanks for you reply but I have a big problem, I explain.
My firmware is: 0.9.974I just tried again and now the port is accepted.What happens there? I tried dozens of times, and when we talk, now zipabox accept port number.By cons, open remote or local access works, but zipabox request the user and password as it is entered in the configuration of the camera on the table zipabox. The url of stream / videostream.cgi on the browser, but still I must return the user password. My camera is a Heden CAMHED04IP
No thumbnail :(
Thanks for you reply but I have a big problem, I explain.
My firmware is: 0.9.974I just tried again and now the port is accepted.What happens there? I tried dozens of times, and when we talk, now zipabox accept port number.By cons, open remote or local access works, but zipabox request the user and password as it is entered in the configuration of the camera on the table zipabox. The url of stream / videostream.cgi on the browser, but still I must return the user password. My camera is a Heden CAMHED04IP
No thumbnail :(
on all my cameras I see in the url my user and password is correct by against the passage of parameters will not boot because nothing is displayed.
on all my cameras I see in the url my user and password is correct by against the passage of parameters will not boot because nothing is displayed.
humm is related to the FTP server? is that the thumbnails are displayed only in this case?
humm is related to the FTP server? is that the thumbnails are displayed only in this case?
Yes, you should configure camera FTP. And don't forget to configure events when it need to send snapshots.
Yes, you should configure camera FTP. And don't forget to configure events when it need to send snapshots.
not work, no thumbnail.
Cameras work on Open in remote (if I enter the user/password)
see attached files
not work, no thumbnail.
Cameras work on Open in remote (if I enter the user/password)
see attached files
You probably didn't configured your camera FTP correctly. Did you entered FTP settings provided by Zipato when you click on camera settings on dashboard?
You probably didn't configured your camera FTP correctly. Did you entered FTP settings provided by Zipato when you click on camera settings on dashboard?
I understand.
Work ! but not cameras with Activex.
I understand.
Work ! but not cameras with Activex.
Any suggestion?
Any suggestion?
What's happen ?
I configured my ip cam with custom port but after few time setting self changed by deleting my custom port on the cam url . . .
What's happen ?
I configured my ip cam with custom port but after few time setting self changed by deleting my custom port on the cam url . . .
Replies have been locked on this page!