This object is in archive! 
Siren device not showing in Alarm configuration
Known
Hi ,
I've added a Fortezz alarm (SAA 03) as a siren device and its working ok. However, I can't see it in the select siren list in the Alarm configuration. I've tried various "Show As Device" options but can't get it to work.
Ian
You can't vote. Please authorize!
No connection
Real-time notifications may not work
When I look at that siren, it shows a slider bar and percentage.......... seems like it has not been included properly and somehow shows as a dimmer device....?
When I look at that siren, it shows a slider bar and percentage.......... seems like it has not been included properly and somehow shows as a dimmer device....?
Yes, good thought. Try to remove, reset and reinclude.
Yes, good thought. Try to remove, reset and reinclude.
HI Thanks,
I'll try and reset. but I believe it is a multilevel device, thats why its been included with a slider bar, can this be changed?
From the Fortress manual:
Controlling the SSA3 (MultiLevel Switch Command Class or Basic Command Class)
If a Z-Wave MultiLevel Switch Set or Basic Set signal with a value of 67 to 99 or 255 is received by the SSA3, the unit
will sound a 120-decibel audible alarm and will flash the strobe lights. A value of 1 to 33 will turn on only the strobe
lights while a value of 34 to 66 will turn on only the siren. The same messages with value 0 will turn off both the siren
and strobe lights.
I'll let you know how it goes after the weekend.
Ian
HI Thanks,
I'll try and reset. but I believe it is a multilevel device, thats why its been included with a slider bar, can this be changed?
From the Fortress manual:
Controlling the SSA3 (MultiLevel Switch Command Class or Basic Command Class)
If a Z-Wave MultiLevel Switch Set or Basic Set signal with a value of 67 to 99 or 255 is received by the SSA3, the unit
will sound a 120-decibel audible alarm and will flash the strobe lights. A value of 1 to 33 will turn on only the strobe
lights while a value of 34 to 66 will turn on only the siren. The same messages with value 0 will turn off both the siren
and strobe lights.
I'll let you know how it goes after the weekend.
Ian
I've got around the problem by setting up a virtual switch that does show as a siren, then use rules to turn the real siren on and off.
I've got around the problem by setting up a virtual switch that does show as a siren, then use rules to turn the real siren on and off.
Replies have been locked on this page!