This object is in archive!
Alarm Zone status shows incorrectly on Android tablets!? Very strange... Zipabox 1.0.17, app 4.0.4
Known
Zipabox (1.0.17)
With my 2 Android tablets (zipato app 4.0.2 and 4.0.4, both marshmallow 6.01) the status of the alarm zones is always "Ready", My phone (zipato app 4.04 marshmallow 6.01) and the web-app shows correctly that a zone is Not ready when a door is open for example.
All devices are on the same network connecting to the Zipabox locally except for the web-app of course.
How come it works this way? It has been working before on all my devices, what have happened to the tablets or with your code for tablets?
Is there anyone else who have seen this?
Best regards, Erik
The same problem 
No connection
Real-time notifications may not work
Any tips or projections for a fix?
Should I erase the app on the tablets and reinstall?
Any tips or projections for a fix?
Should I erase the app on the tablets and reinstall?
Partition and Zone status shows incorrectly as soon as you do a refresh....both on phones and tablets. Need to be fixed.... :) As a workaround you need to look at all the sensors manually and then arm if ready for arming.
Partition and Zone status shows incorrectly as soon as you do a refresh....both on phones and tablets. Need to be fixed.... :) As a workaround you need to look at all the sensors manually and then arm if ready for arming.
I have the same issue on Android phones and tablets. It is even so that the widget may show one status and when you click the widget and enters the view where you arm/disarm another status may be shown. Different status may also be shown on different devices. It has also happened that the alarm was armed, it showed "disarmed" and when I still pressed "disarm" I did not get any dial pad to enter my PIN, I could not disarm and after the entry timeout the alarm went on. This is very confusing and dissapointing for my family members and also if there are several false alarms neighbors will also stop paying attention when the alarm goes off. Zipato team, please urgently fix his.
I have the same issue on Android phones and tablets. It is even so that the widget may show one status and when you click the widget and enters the view where you arm/disarm another status may be shown. Different status may also be shown on different devices. It has also happened that the alarm was armed, it showed "disarmed" and when I still pressed "disarm" I did not get any dial pad to enter my PIN, I could not disarm and after the entry timeout the alarm went on. This is very confusing and dissapointing for my family members and also if there are several false alarms neighbors will also stop paying attention when the alarm goes off. Zipato team, please urgently fix his.
Replies have been locked on this page!