This object is in archive!
Data consumption between controller and cloud
Answered
Have anybody measured typical data consumption with Zipabox or Zipatile?
I am considering to install one in my parents summer house. Since there is only mobile Internet there, I am concerned about bandwidth cost.
I would need three temp sensors and 3 plug-in modules. About 2 schedules.
The same question
No connection
Real-time notifications may not work
Now this would be some interesting information...I dont think it is much data. Probably a firmware update has bigger consumption
Now this would be some interesting information...I dont think it is much data. Probably a firmware update has bigger consumption
I guess I could try at home, using a proxy. But I am not sure that Zipabox supports passing through proxies?
I guess I could try at home, using a proxy. But I am not sure that Zipabox supports passing through proxies?
Yes it does, I saw a guide on one of the topics. In the controller settings you have option to enter proxy server details
Yes it does, I saw a guide on one of the topics. In the controller settings you have option to enter proxy server details
Dear Marius,
It all depends on how much is used. Normal data traffic on monthly bases will be around 20 MB. (Without transmission of multimedia content such as video streaming or snapshots)
*The firmware upgrade is around 60 MB.
For more details on proxy, please see link below:
https://community.zipato.com/topic/zipaboxzipamini-in-a-proxy-environment
Best regards,
Pero Zovkic
Dear Marius,
It all depends on how much is used. Normal data traffic on monthly bases will be around 20 MB. (Without transmission of multimedia content such as video streaming or snapshots)
*The firmware upgrade is around 60 MB.
For more details on proxy, please see link below:
https://community.zipato.com/topic/zipaboxzipamini-in-a-proxy-environment
Best regards,
Pero Zovkic
A friend has a Zipabox Duo and two 433mhz Oregon temp and humidity sensors in his boat. This setup consumes about 40MB per month.
In a boat there will be frequent temperature fluctuations and the Oregons transmits every 0.1 degree change, so it probably produces more data than it would do mounted inside a house
A friend has a Zipabox Duo and two 433mhz Oregon temp and humidity sensors in his boat. This setup consumes about 40MB per month.
In a boat there will be frequent temperature fluctuations and the Oregons transmits every 0.1 degree change, so it probably produces more data than it would do mounted inside a house
Replies have been locked on this page!