This object is in archive! 

2 on/off switch - 1 light

Imre Kiss shared this problem 3 years ago
In Progress

Whats wrong?

Replies (7)

photo
1

Hi

to help you fix your issue, please describe the issue in more details.

photo
1

I have 2 on/off switch (Corridor Left and Corridor single). As an alternative switch, I would like to use the two switches for one lamp.

I want both switches to turn on the light AND set the other switch.

photo
1

Hi

your rules set another switch to the same state (if ON-> another set to ON and vice versa) but it is not visible if lamp is set to ON or not.

photo
1

I turn on 1st switch but the rule does not turn on the other switch.

photo
1

Hi

in this case the best debug approach is to use virtual switches and see if virtual switches are turn on/off instead of real switches - in this way you can avoid a potential issue with a wrong device's endpoints.

photo
1

It works from the Zipato app correctly.

How can i use virtual switch?

photo
1

Hi

just add virtual switches under these rules for example 1 virtual switch before IF loop and another inside IF loop to check if the rule is triggereed and IF loop works.

photo
2

Have you synchronized the rules?

photo
1

yes

photo
1

I changed. How can i test this?

ps: what's the problem with my original rules?

photo
photo
1

How about you use toggle action, so if any of the switches changes state then you toggle the light.

photo
1

How can i use this?

photo
Leave a Comment
 
Attach a file