This object is in archive! 
intermatic pe650
Under Consideration
Anyone got any idea how to setup an Intermatic PE650 Z Wave Tranceiver?
It connect perfectly and controls everything with the supplied Intermatic PE950 Hand Held Remote but I want to configure this with Zipato. When I add the device it appears as a Sigma Designs Multilevel Switch.
Should be able to control Pool Pumps, Actuators, Blower and Heater Temps.
Any ideas or help greatly appreciated.
Steve
You can't vote. Please authorize!
No connection
Real-time notifications may not work
interesting, does pressing a button refer to a variable on the multilevel switch? So instance pressing a top left button make the multilevel go to 1. If so you could create a rule for this to activate anything you need.
Have you tried to change the device type in the settings?
interesting, does pressing a button refer to a variable on the multilevel switch? So instance pressing a top left button make the multilevel go to 1. If so you could create a rule for this to activate anything you need.
Have you tried to change the device type in the settings?
Thanks Adrian,
Stupid thing is that when I add the Z Wave device to Zipato the only way to get the controller back on line is to reset the node and readd it which then obviously knocks out the Zipato device.
I tried changing the type but regardless of what I add I only get 0-100% same multi value sensor.
I've sent a mail to Intermatic the company who make this tranciever and see if I get any joy there.
Thanks for the help though
Steve
Thanks Adrian,
Stupid thing is that when I add the Z Wave device to Zipato the only way to get the controller back on line is to reset the node and readd it which then obviously knocks out the Zipato device.
I tried changing the type but regardless of what I add I only get 0-100% same multi value sensor.
I've sent a mail to Intermatic the company who make this tranciever and see if I get any joy there.
Thanks for the help though
Steve
Replies have been locked on this page!