This object is in archive! 

Qubino Flush Dimmer 0-10V

Jacob Wiqvist shared this question 7 years ago
Need Answer

Does Zipabox suport Qubino Flush Dimmer 0-10V?


Acording to the swedish seller m.nu it does not work with Zipabox?


Product: Flush dimmer 0-10V

Controller: Zipabox

Software: 0.9.999.8a

Comment: "appears as a switch can therefore not be dimmed. Temperature sensor works. 0-10V input does not work."


http://qubino.com/products/flush-dimmer0-10v/


https://www.m.nu/flush-dimmer-010v-qubino-p-2760.html

Replies (3)

photo
1

Zipato should make device descriptors.

photo
1

What is that "device descriptors"?


Tied to google it but did not found anything smart.

photo
1

dubble post

photo
1

This is some XML file with device parameters. As Zipato does a specific tempate custom made for Zipato system for all devices, it is not possible to use website like pepper1.

This is why you have to raise a ticket with zipato if you want a device to be supported.

On the other hand this saves you time as it is down to Zipato to do this and not you...

photo
1

Descriptors should be already there. Even Qubino confirmed this is OK. Who's "comment" is that??

photo
1

It must be a user repor. If I buy this tevice I will send a new user report and hope that they change the compatibility. But does al the functions that he point out, work. Does it aper as a dimmer?


And also if someone knows a good way of power supply in the wall to the dimmer would be good?


All the professional dimmers I have worked with converts 230V to 1-10 volt out to the LED-driver.


And also how does it work with the 1-10 volt output? According to another page (http://elektronikforumet.com/forum/viewtopic.php?f=2&t=82742) it sends 0,24 volts when in the loest setting.


The plan is to use this dimmer with a potentiometer and in kombination a toggle on of switch. So it is easy to turn on and off and also dim on 2 separate buttons.


I try to find the best led drivers and lights for this purpose. I found my dream light that dim to warm and also dim very low: http://www.sg-as.no/swe/produkt/gyro-dimtowarm-matt-vit-6w-led-2000-28000k/


Unfortunately they can't be installed with insulation directly over them like this: http://www.sg-as.no/swe/produkt/uniled-isosafe-matt-vit-8w-led-2700k/

"UNILED ISOSAFE"..... the name say it all. But it is not possible to angle it unfortunately. Maybe more beautiful?


I also found this 12 driver for the dimmer: http://www.powersystemsdesign.com/regulated-mini-power-supplies-fit-behind-standard-wall-outlets/6


All tip on the best sulotion to instal between 5-20 8watt led lights is welcome. Get it safe and simple.


But is this the best solution?

Replies have been locked on this page!