This object is in archive! 

D-Link Z-Wave Door/Window Sensor DCH-Z110 support

Bernhard shared this idea 8 years ago
Completed

Hallo!


Plesae add support to

D-Link Z-Wave Door/Window Sensor, Product Identifier: DCH-Z110


Thanks a lot!

bernhard

Best Answer
photo

Hey, change customer switch in configuration to 62 and it works. For setting configuration you have to wake up with 3x times push buttom inside the case Have a lot of them and they allwork after setting this value.

Replies (20)

photo
1

Dear Berhard,


Currently D-Link Z-Wave Door/Window Sensor DCH-Z110 device are not supported, but will be in the near future.


Best regards,

Pero Zovkic

photo
1

Hallo!


The Zipato Team added support for the device.

Thanks a lot,

bernhard

photo
1

Hi Bernhard.


Do you mean is is fully working now?

photo
1

Can anybody help me with the DCH-Z110 devices? With my Zipabox they do NOT work fine :-(

photo
1

I get temperature and brightness in % but I do NOT get the door status (open/close).

photo
1

Did you check if the door sensor shows as a device? This you can change by yourselfe.

photo
1

Carsten,


Open a ticket on zipato support.

photo
1

@Andreas Tecklenburg: Yes. The device is there. But the status of the device is not updated. Even if the door opens or closes.


@Alberto Macias: I did. But the cannot help me :-( #HTB-432-83941

photo
1

try removing it and readding it. Otherwise it could be a faulty dlink sensor.

photo
1

I tried this many times. But it does not help. It's always the same. I don't think that the sensor device is broken, because I have 2 of them. And both are not working fine.

photo
1

Have you check configuration on this devise.

5 Operation mode bit 2 set to 0

7 Custom function bit 3 set to 0

11 Report interval < 1

I think that is al configuration. I haven't this, so i can't test it.

photo
1

This is the original configuration after including in my Zipabox.

photo
1

I lowered the intervals afterwards but it changed nothing.

photo
1

In webfrontend it says "Closed" but there is no data. In Zipato Android App there is no status shown.

If the sensor opens or closes there is a submission to zipabox. But Zipabox don't shows this. In Zipabox eventlog there is nothing.

photo
1

Did you find a solution for this one

photo
1

I have run the software on my laptop and now my Windows 10 Keeps Restarting. The system won't remain on for even a while. It is being difficult for me to work on the system anymore.

photo
1

Wow, that’s what I was searching for, what a data!

existing here at this blog, thanks admin of this web site

iPhone Repair Dubai

photo
1

Is there anyone knows the solution?

photo
1

Hey, change customer switch in configuration to 62 and it works. For setting configuration you have to wake up with 3x times push buttom inside the case Have a lot of them and they allwork after setting this value.

photo
1

Hi

D-Link Door/Window Sensor DCH-Z110 is fully supported on V3 platform.

Please chek all supported device at the following link:

https://www.zipato.com/how-it-works/supported-devices

Leave a Comment
 
Attach a file