Activate alarm with PIR and KeyFob
Answered
Hello,
I have a zwave PIR sensor near the door and I manage the Alarm system with keyfobs. They work great but I have a litle problem. When I try to activate the alarm when Im going out of home the PIR sensor is activated and I cant Arm the house with the keyfob. I need to bypass the Zone and then I can Arm the house.
There is a way to Arm the house with one of the Zones not ready? I can permanent bypass the zone but this means than the sensor will not trigger the Alarm. Also I dont want to be bypassing the Zone each time I need to Arm the house.
Thank you in advance.
The same question You can't vote. Please authorize!
You can't vote. Please authorize!
You can't vote. Please authorize!
You can't vote. Please authorize!
You can't vote. Please authorize!
You can't vote. Please authorize!
No connection
Real-time notifications may not work
Yup, go to the zone settings of the PIR >> scroll down >> exit and entry zone on. (and change the entry/exit time if you want to).
Yup, go to the zone settings of the PIR >> scroll down >> exit and entry zone on. (and change the entry/exit time if you want to).
Exit zone is only when you already Armed house no?
I thing I dint explain well sorry. I have tried whit exit and entry zone but not works.
My problem is when the PIR sensor is in state MOTION and then I try to Arm the house with the keyfob, the Zone is in state Not ready and dont allow me to Arm house. I need to wait out of the house 4 min till PIR return to state NO_MOTION for Arm house with my keyfob :(
Or also I can log to my phone app, bypass the PIR Sensor and then Arm the house.
P.S: How do you change entry/exit time? I can select them but not manage it.
Exit zone is only when you already Armed house no?
I thing I dint explain well sorry. I have tried whit exit and entry zone but not works.
My problem is when the PIR sensor is in state MOTION and then I try to Arm the house with the keyfob, the Zone is in state Not ready and dont allow me to Arm house. I need to wait out of the house 4 min till PIR return to state NO_MOTION for Arm house with my keyfob :(
Or also I can log to my phone app, bypass the PIR Sensor and then Arm the house.
P.S: How do you change entry/exit time? I can select them but not manage it.
Aah, ok
@ > Edit partion you can edit the entry exit time.
But got this idea:
- Put the arm state of the PIR on ANY (edit zone > 3th pull down)
Or remove the PIR from the alarm panel and the use the rule creator to trigger the alarm.
Aah, ok
@ > Edit partion you can edit the entry exit time.
But got this idea:
- Put the arm state of the PIR on ANY (edit zone > 3th pull down)
Or remove the PIR from the alarm panel and the use the rule creator to trigger the alarm.
Thank for the idea, I have changed exit time to 260 seconds and changedthe arm state of the PIR on ANY.
Now seems to work fine :)
Thank for the idea, I have changed exit time to 260 seconds and changedthe arm state of the PIR on ANY.
Now seems to work fine :)
No problem!
No problem!
Replies have been locked on this page!