This object is in archive!
Zipato - Is it possible to set the report interval ?
Need Answer
Hello,
I would like to know if there is a configuration to set report interval on Zipato.
On the attached picture, you can see I have a measurement only when the value changes. I would like to have a value every 30 min even it is the same. Is is possible to configure this ?
For information, this device is a MH9-CO2 and I saw it has parameters like :
- Parameter 2: CO2 report interval. Size: 1 Byte, Default Value: 10 (Valuex5ppm).
- Parameter 3: Temperature report interval. Size: 1 Byte, Default Value: 1 (Value x 0,5°C).
- Parameter 4: Humidity report interval. Size: 1 Byte, Default Value: 2 (Value in %)
But if I understand correctly, it still depends on value change.
I also saw that in the config of the device , we find these parameters (configuration) but also other parameters like :
- wakeUpInterval
- periodicallyWakeUp
- minWakeUpInterval
- wakeUpIntervalStep
- maxWakeUpInterval
- defaultWakeUpInterval
Are those parameters more suitable for my need ?
Do you have a solution ?
Thanks in advance.
Files:
Temp_onchange.PNG
The same question 
Access denied
No connection
Real-time notifications may not work
Very helpful
Very helpful
you could use manual configure the parameters..
you could use manual configure the parameters..
Replies have been locked on this page!