This object is in archive!
BackUp Module Functiuns unrecognize on one on my zipabox
Known
Hello,
I have 2 zipabox with power backup module, one was bought last year, the other one 2 months ago.
On one of them (the new one), appears the following functions :
- backup module power mode as a sensor
- backup module shock sensor as a sensor
- backup module battery as a meter (but battery level is always at 25% and the battery status is always unknown).
And on the older one none of those pieces of information appears.
Is it normal ? Must I do something special ?
Does those function really work as nothing change when I unplug the power plug and use the battery or when I do shake the box.
Thanks in advance for your answer.
Philippe.
The same problem 
No connection
Real-time notifications may not work
We modified the firmware and the web interface to show the battery status (charging / discharging) and percentage of charge on a single meter, and temperature on a separate sensor on the dashboard.
We published those changes on the web interface, but haven't yet released the new Zipabox firmware - we will do so shortly.
In any case, changes become visible if you synchronize the box with the Backup module connected - that's why you're seeing this on only one of your modules.
We modified the firmware and the web interface to show the battery status (charging / discharging) and percentage of charge on a single meter, and temperature on a separate sensor on the dashboard.
We published those changes on the web interface, but haven't yet released the new Zipabox firmware - we will do so shortly.
In any case, changes become visible if you synchronize the box with the Backup module connected - that's why you're seeing this on only one of your modules.
We modified the firmware and the web interface to show the battery status (charging / discharging) and percentage of charge on a single meter, and temperature on a separate sensor on the dashboard.
We published those changes on the web interface, but haven't yet released the new Zipabox firmware - we will do so shortly.
In any case, changes become visible if you synchronize the box with the Backup module connected - that's why you're seeing this on only one of your modules.
We modified the firmware and the web interface to show the battery status (charging / discharging) and percentage of charge on a single meter, and temperature on a separate sensor on the dashboard.
We published those changes on the web interface, but haven't yet released the new Zipabox firmware - we will do so shortly.
In any case, changes become visible if you synchronize the box with the Backup module connected - that's why you're seeing this on only one of your modules.
I have the same problem. Battery level always shows 26% in my case though!
I need to monitor if my house supply has lost power and should be able to do this by monitoring whether the backup module is discharging or not. How can I do this on the Rules Creator?
I have the same problem. Battery level always shows 26% in my case though!
I need to monitor if my house supply has lost power and should be able to do this by monitoring whether the backup module is discharging or not. How can I do this on the Rules Creator?
I have the samen problems for many months now. Not able to see if the main power is off.
I also have the 26%, i think this is the bat temp. Some back-up module sensors are mixed up.
I have the samen problems for many months now. Not able to see if the main power is off.
I also have the 26%, i think this is the bat temp. Some back-up module sensors are mixed up.
I have tried this and it still does not work. I have the same rule as you have above:
I have tried this and it still does not work. I have the same rule as you have above:
Hello Ian,
Rule is working but your Backup module has old device descriptor. You can see difference between "Backup module battery" and "Backup module" Open a ticket with support so that your device descriptor gets updated.
Hello Ian,
Rule is working but your Backup module has old device descriptor. You can see difference between "Backup module battery" and "Backup module" Open a ticket with support so that your device descriptor gets updated.
Replies have been locked on this page!