This object is in archive!
Bindings, where are the Zigbee options?
Need Answer
In the old Web Control center you could bind almost anything to anything. Now bindings all seem restricted to Z-wave devices only, Why? Where are the options of binding a simple on/off open/close zigbee device to a virtual or enocean device?
The same question
No connection
Real-time notifications may not work
If you referring to the assotiation manager limitation, then there is another way. Go to a device you want to bind and at certail level you will find the correct bind options separated by different event.
For example see attached screenshot. These option I have when selecting a virtual sensor (1 level below root).
If you referring to the assotiation manager limitation, then there is another way. Go to a device you want to bind and at certail level you will find the correct bind options separated by different event.
For example see attached screenshot. These option I have when selecting a virtual sensor (1 level below root).
Thanks Attila, but I know this, there are just nothing to bind with a Zigbee device or to bind to a zigbee device. eg I can use a virtual device and bind to an enocean or zwave device, but zigbee devices do not show up. I am wondering why? especially since Zipato are bringing out a range of zigbee deivces now.
Thanks Attila, but I know this, there are just nothing to bind with a Zigbee device or to bind to a zigbee device. eg I can use a virtual device and bind to an enocean or zwave device, but zigbee devices do not show up. I am wondering why? especially since Zipato are bringing out a range of zigbee deivces now.
Ok. Well this case need to open ticket...
Ok. Well this case need to open ticket...
Replies have been locked on this page!