Delay for Controller Down Warnings
Hi,
With the "issue" of Zipatile momentarily loosing connection over WiFi (android issue more so than Zipato if I remember correctly), is there a way to set a delay for this warning ?
It's a bit annoying getting these warnings (usually at least once per day) when I receive the "your controller is up" message before I even receive one about it being down in the first place.
Further more, I don't want these warnings / calls just because I restart one of my controllers.
Ideallly I'd like to see a configurable time-out period to counter this issue.
From: Zipabox Alarm[mailto:zipabox@zipato.com]
Sent: Wednesday, August 16, 2017 2:49 PM
To: XXX@gmail.com
Subject: alarm event
Hi X,Read very carefully, this isa very important alarm message.
Your Zipato with serial number XXX reported:
The controller isunreachable
Details:
Message: controller offlinePartition: SystemArmed: HOMETripped: false
Cheers.
From: Zipabox Alarm[mailto:zipabox@zipato.com]
Sent: Wednesday, August 16, 2017 2:42 PM
To: xxx@gmail.com
Subject: alarm event
Hi ,Read very carefully, this isa very important alarm message.
Your Zipato with serial number XXX reported:
The controller is reachableagain
Details:
Message: controller onlinePartition: SystemArmed: HOMETripped: false
Cheers.
The same question
Update:
Ups, I just found out, that there is a delay option with the battery / online alarm. I´ll try that out, perhaps my problem is already solved. Perhaps that is what you are looking for:
Old post:
Very good idea! I use an extra rule just to disarm the battery alarm each night during the period where my router gets a new IP adress. With a configurable delay I could skip that rule
(First scheduler fires at 2:00 and the second at 3:30)
And yes, it works even though I don´t have the "Uhrzeit of" (now) tile.
Update:
Ups, I just found out, that there is a delay option with the battery / online alarm. I´ll try that out, perhaps my problem is already solved. Perhaps that is what you are looking for:
Old post:
Very good idea! I use an extra rule just to disarm the battery alarm each night during the period where my router gets a new IP adress. With a configurable delay I could skip that rule
(First scheduler fires at 2:00 and the second at 3:30)
And yes, it works even though I don´t have the "Uhrzeit of" (now) tile.
Update:
Ups, I just found out, that there is a delay option with the battery / online alarm. I´ll try that out, perhaps my problem is already solved. Perhaps that is what you are looking for:
Old post:
Very good idea! I use an extra rule just to disarm the battery alarm each night during the period where my router gets a new IP adress. With a configurable delay I could skip that rule
(First scheduler fires at 2:00 and the second at 3:30)
And yes, it works even though I don´t have the "Uhrzeit of" (now) tile.
Update:
Ups, I just found out, that there is a delay option with the battery / online alarm. I´ll try that out, perhaps my problem is already solved. Perhaps that is what you are looking for:
Old post:
Very good idea! I use an extra rule just to disarm the battery alarm each night during the period where my router gets a new IP adress. With a configurable delay I could skip that rule
(First scheduler fires at 2:00 and the second at 3:30)
And yes, it works even though I don´t have the "Uhrzeit of" (now) tile.
Any update to this ? With 15 calls in October alone this is progressing from a nuisance to being very frustrating.
Any update to this ? With 15 calls in October alone this is progressing from a nuisance to being very frustrating.
Dear Zipato,
I don't consider this issue resolved.I'm unable to find a setting that allows me to set a delay for when the "offline" alarm is triggered.
Dear Zipato,
I don't consider this issue resolved.I'm unable to find a setting that allows me to set a delay for when the "offline" alarm is triggered.
Replies have been locked on this page!