This object is in archive! 

What exactly is the function of the two LED buttons on a Zipabox

Marcus Khoo shared this question 9 years ago

I do not seem to be able to get a description of exactly what the function is of:

  • Button A
  • Button B

on the Zipabox

Could you please provide the anwsers

Replies (4)


Is this a Zipato secret?



Except for via the control panel, is there any way to initiate a reboot of the Zipabox without removing the power supply, e.g. by pressing one or both buttons for x seconds or whatever?

(If the Zipabox has a backup module attached, one must physically take the devices out from the breaker cabinet or wherever the Zipabox is installed, then break the modules apart from one another, in order to remove power; there is hopefully a simpler way to initiate a reboot)


You can trigger a restart with the reset button, on the top of Zipabox.

For a hard reset Press and hold Button 2 on your Zipabox and then briefly press and release Reset buttonKeep holding Button 2 for 5 seconds and then release it. Thereafter, the box starts with the old firmware, retained all devices.

regards Maik



oRobert := self

oRobert:feelings.foolish := 90

oRobert:feelings.shame := 10

oRobert:feelings.pride := -100 := "RTFM"


Thanks :-)

Leave a Comment
Attach a file