This object is in archive!
rules doesn't work
Solved
hi i have a problem with rules.
my rules do not trigger...
on the dashboard swith on/off run normaly.
Files:
PrtScr capture.jpg
The same problem 
No connection
Real-time notifications may not work
New version is deployed and all problems should be fixed now.
New version is deployed and all problems should be fixed now.
Same problem with sheduler and "time of now betwen time and time"never work.
Same problem with sheduler and "time of now betwen time and time"never work.
Hello ChrisDalo, did you pressed "synchronise rules" button after creation of the rules?
Hello ChrisDalo, did you pressed "synchronise rules" button after creation of the rules?
Yes, i press "synchronise rules" and i try a lot of other things "synchronise" on dashboard, "reset" on Zipabox switch, use "time of now betwen time and time".
No actions start whem the hour come. Milan has my acces codes, you can see on my box.
The rule with HTTP to send a push via "Pushingbox" do not work too.
But i progress with ZXT120. It works better, however i can't start and stop the AC, but regulation works.
Yes, i press "synchronise rules" and i try a lot of other things "synchronise" on dashboard, "reset" on Zipabox switch, use "time of now betwen time and time".
No actions start whem the hour come. Milan has my acces codes, you can see on my box.
The rule with HTTP to send a push via "Pushingbox" do not work too.
But i progress with ZXT120. It works better, however i can't start and stop the AC, but regulation works.
On the other side, if you want to turn the climate on/off, you should use ZXT120 within a lights and power widget or rule creator, but before you need to learn a codes for ON/OFF.
Also, there are some changes with new series of Remotec ZXT120, learned codes it is presenting different, but this I will check at Monday...
On the other side, if you want to turn the climate on/off, you should use ZXT120 within a lights and power widget or rule creator, but before you need to learn a codes for ON/OFF.
Also, there are some changes with new series of Remotec ZXT120, learned codes it is presenting different, but this I will check at Monday...
Same problem too, reset, or synchronise dashboard and synchronize rules...
it's a very high problem, nothing run at the time.
i test this week with a motion sensor for run a rule...
Same problem too, reset, or synchronise dashboard and synchronize rules...
it's a very high problem, nothing run at the time.
i test this week with a motion sensor for run a rule...
There was an issue with compiling of the rules, please check if it works now.
There was an issue with compiling of the rules, please check if it works now.
hi,
the rule of the time works fine now
i'am happy.
Ch.
hi,
the rule of the time works fine now
i'am happy.
Ch.
hum it's not ok again.
today doesn't work again...
that's going on with the rules?
hum it's not ok again.
today doesn't work again...
that's going on with the rules?
For me always ok.
Don't forget to "synchronise rules" and ""synchronise" after on dashboard
For me always ok.
Don't forget to "synchronise rules" and ""synchronise" after on dashboard
yes i synchronise rules and synchronise box on a dashbord
but the rules do not trigger...
it's big problem...:(
yes i synchronise rules and synchronise box on a dashbord
but the rules do not trigger...
it's big problem...:(
For me, all the rules're working.
I made rules with Scheduler, Counter, HTTP request (PushingBox), Increase Variable.
I don't have any problemes.
For me, all the rules're working.
I made rules with Scheduler, Counter, HTTP request (PushingBox), Increase Variable.
I don't have any problemes.
New version is deployed and all problems should be fixed now.
New version is deployed and all problems should be fixed now.
it's ok, I had a problem with a module
all run now.
it's ok, I had a problem with a module
all run now.
Replies have been locked on this page!