NodOn Soft Remote and NodOn Wall Switch
Need Answer
Hi,
A year ago i bought two ZME_WALLC-S, but there was and is still no support for those.
So now i bought a NodOn Soft Remote and a NodOn Wall Switch to se if they work. Everywhere i found it said Zipato supported. And i can include them without problem.
But it seems that i need help writing rules, cause i can't get anything to work.
Yesterday when i tried i could do a rule like "When button 1 1-click"
Today the option 1-click is gone and i have on, off, decrease, increase, setvalue...
I would like to turn on if one click and dim up if long press or double press.
Anyone got these to work?
You can't vote. Please authorize!
You can't vote. Please authorize!
You can't vote. Please authorize!
You can't vote. Please authorize!
No connection
Real-time notifications may not work
Last week i got some samples. Going to test them asp but they should be supported.
Last week i got some samples. Going to test them asp but they should be supported.
Ok, i used the wrong element in the rule. I used the "Group 2 - Button 1" and so on for all the buttons.
But the one to use was the single one that i didn't think of using before. The one with out button in the name.
What are the "Group 2 - Button 1" used for?
And can anyone help me with how i write a rule that does this:
When "+ Button Held" startchangeup until button held is released then stop change.
Ok, i used the wrong element in the rule. I used the "Group 2 - Button 1" and so on for all the buttons.
But the one to use was the single one that i didn't think of using before. The one with out button in the name.
What are the "Group 2 - Button 1" used for?
And can anyone help me with how i write a rule that does this:
When "+ Button Held" startchangeup until button held is released then stop change.
...
...
Dear Jocke,
Do you still have your ZME_WALLC-S? It seems some progress have been made for supporting them. It seems that is same hardware inside than for the remotes kfob-c ( https://community.zipato.com/topic/support-of-popp-kfob-c-4-buttons-keyfob). Could you have a look if the situation has changed?
Otherwise I am also interested to get a sample for handling correctly a long press on a button.
Dear Jocke,
Do you still have your ZME_WALLC-S? It seems some progress have been made for supporting them. It seems that is same hardware inside than for the remotes kfob-c ( https://community.zipato.com/topic/support-of-popp-kfob-c-4-buttons-keyfob). Could you have a look if the situation has changed?
Otherwise I am also interested to get a sample for handling correctly a long press on a button.
Hi , since yesterday I have a NodOn Soft Remote, but I cannot get it included at all.
Hi , since yesterday I have a NodOn Soft Remote, but I cannot get it included at all.
Hi , since yesterday I have a NodOn Soft Remote, but I cannot get it included at all.
Hi , since yesterday I have a NodOn Soft Remote, but I cannot get it included at all.
I have the same problem, cannot include.
I have tested both using new and old UI, no difference.
Edit: Selecting Exclude mode on the remote in the old UI got it to include finally!
I have the same problem, cannot include.
I have tested both using new and old UI, no difference.
Edit: Selecting Exclude mode on the remote in the old UI got it to include finally!
I was able to include them if i put them next to the zipatobox when i did the include.
The soft remote works fine. But the nodon wall switch is so slow so long delay until action. And first press on a button feels like a wakeup cause it never triggers anything.
I was able to include them if i put them next to the zipatobox when i did the include.
The soft remote works fine. But the nodon wall switch is so slow so long delay until action. And first press on a button feels like a wakeup cause it never triggers anything.
Replies have been locked on this page!