This object is in archive!
Z-Wave.Me ZME_WALLC-S Wall Switch supported? ( Battery operated 4-way, inexpensive, surface switch)
Need Answer
Here is instructions manual about this switch:
http://www.vesternet.com/downloads/dl/file/id/279/z_wave_me_wall_controller_set_manual.pdf
The same question You can't vote. Please authorize!
You can't vote. Please authorize!
You can't vote. Please authorize!
You can't vote. Please authorize!
You can't vote. Please authorize!
You can't vote. Please authorize!
You can't vote. Please authorize!
No connection
Real-time notifications may not work
Näyttää olevan tarjolla ilman kehystä ja painikkeita. Hinta kiipeää niiden kanssa.
Näyttää olevan tarjolla ilman kehystä ja painikkeita. Hinta kiipeää niiden kanssa.
Same problem as: https://community.zipato.com/responses/z-waveme-wall-c-zme-wcd1-and-zipabox ???
Same problem as: https://community.zipato.com/responses/z-waveme-wall-c-zme-wcd1-and-zipabox ???
No not supported :(
i found out the hard way...
No not supported :(
i found out the hard way...
Battery powered wall switches has to be supported like Z-wave_Me or Duwi,
Please answer Zipato team when these are scheduled to be supported?
Battery powered wall switches has to be supported like Z-wave_Me or Duwi,
Please answer Zipato team when these are scheduled to be supported?
Please add support for this wall mounted switch.
Please add support for this wall mounted switch.
Is this supported now?
Is this supported now?
Is this supported now?
i really need it to work.
i have 10 Zme_wallc-s Wall switches that i want to use.
Is this supported now?
i really need it to work.
i have 10 Zme_wallc-s Wall switches that i want to use.
You will still have the option to setup a direct connection (so without zipato) between the wall switch and the 2 devices. You can still use the devices in Zipato and the rules. Also when zipato is offline they still work :)
I have it working like this until it gets supported fully by Zipato
You will still have the option to setup a direct connection (so without zipato) between the wall switch and the 2 devices. You can still use the devices in Zipato and the rules. Also when zipato is offline they still work :)
I have it working like this until it gets supported fully by Zipato
I got it working as ONE on/off Switch. Will try to write down what I did when I have time. But it would be nice, if we could use all of the switches...
I got it working as ONE on/off Switch. Will try to write down what I did when I have time. But it would be nice, if we could use all of the switches...
Still Same problem, I cannot use my Duwi 05443 or Z-Wave.Me ZME_WALLC-S wall switches, any light in the tunnel for these?
Still Same problem, I cannot use my Duwi 05443 or Z-Wave.Me ZME_WALLC-S wall switches, any light in the tunnel for these?
Still Same problem, I cannot use my Duwi 05443 or Z-Wave.Me ZME_WALLC-S wall switches, any light in the tunnel for these?
Still Same problem, I cannot use my Duwi 05443 or Z-Wave.Me ZME_WALLC-S wall switches, any light in the tunnel for these?
Still Same problem, I cannot use my Duwi 05443 or Z-Wave.Me ZME_WALLC-S wall switches, any light in the tunnel for these? Sorry, I did not realise that it does not update the page... too many same comments....
Still Same problem, I cannot use my Duwi 05443 or Z-Wave.Me ZME_WALLC-S wall switches, any light in the tunnel for these? Sorry, I did not realise that it does not update the page... too many same comments....
I have a Single/Dual Paddle Wall Switch Wireless from Schwaiger.
This appears as Z-Wave.Me ZME_WALLC-S and it works.
I have a Single/Dual Paddle Wall Switch Wireless from Schwaiger.
This appears as Z-Wave.Me ZME_WALLC-S and it works.
How did you include/connect him to the Zipabox?
The manual does not help me.
How did you include/connect him to the Zipabox?
The manual does not help me.
How did you include/connect him to the Zipabox?
The manual does not help me.
How did you include/connect him to the Zipabox?
The manual does not help me.
Press all 4 buttons at the same time until the LED slowly blinks green.
Now the switch in management mode is.
Press button 1 to include.
Button 2 = Wake up
Press all 4 buttons at the same time until the LED slowly blinks green.
Now the switch in management mode is.
Press button 1 to include.
Button 2 = Wake up
Replies have been locked on this page!