This object is in archive! 

Flush On/Off thermostat - Qubino

Thomas N. shared this idea 8 years ago
Under Consideration

hello,


can anyone help me please with my thermostat topic. Something is totally in the opposite way.


Heater: 230V/600Watt Infrared heater

Thermostat: Qubino Flush On/Off thermostat (ZMNHIA2)


Scenario1


Room: 20.3°C

Setpoint: 25.0°C

-> Heater switched OFF (0.0Watt and no 0V outlet measured)


Szenario2

Room: 20.3°C

Setpoint: 11.0°C

-> Heater switched ON (613,5 Watt and 230V outlet measured)


Thanks for your help.


Greets

Replies (2)

photo
1

I had same problem. Change relay switch selection to NC (Normaly Close). There are a problem with hysteresis on and off. It should be

0-127 = 0 - 12,7°C it´s ok in zipabox

128-255 = -0,1 - -12,7°C but in zipabox it is 128 = -12,8°C and 255 = -1°C

For me it works with settings in picture.

d19c4569c5f5a109cbcd38a96cd55665

f1bb5f00370829ac284775a270334e1d

photo
1

I'm not partial to an brand. I was thinking of the GoControl Z-Wave Dimmer (LNWD500Z1) and a GoControl Accessory Switch

https://www.vegas-th.com

Leave a Comment
 
Attach a file