This object is in archive!
Everspring HSP02
Not a Problem
Hi,
I know this question has been asked before, but I can't seem to get my solution to work.
I want to HSP02 to trigger a little when motion is detected, only when the light level is below a certain level.
No matter how I configure it, the motion detector seems to trigger regardless of light level. The other configuration parameters work correctly - Retrigger time and OFF trigger time.
Reading the Everspring user manual, Alarm signals (motion only) are sent to group 1 and Motion/Light triggers send a BASIC_SET Command to group 2.
In Zipato there is no way to see these groupings.
How do I get this device to work correctly?
The same problem 
No connection
Real-time notifications may not work
ZIpato ignores light level settings on Everspring, you should use rules and check current level.
ZIpato ignores light level settings on Everspring, you should use rules and check current level.
Replies have been locked on this page!