This object is in archive!
Has anyone played with Qubino relays?
Need Answer
There is an additional connector for "digital" temperature sensor. Is it however just Dallas DS18B20? Pin voltages match just to V+, data and gnd. Center pin is pulled up via 4k7 resistor, as data should be. I did inclusion with ds18b20 connected, but it does not show "temperature meter"... Only consumption meters ( as it is dual relay)
The same question
No connection
Real-time notifications may not work
Found, and working. It was hidden by default. My bad. But confirmed, that the sensor is DS18B20.
Found, and working. It was hidden by default. My bad. But confirmed, that the sensor is DS18B20.
Working and working... Values are about 4 degrees too low. My current sensor is many years old first series, have to test newer one.
If you want to play with Qubino temp sensor, be careful, there is direct connection from sensor gnd pin to AC live!
Working and working... Values are about 4 degrees too low. My current sensor is many years old first series, have to test newer one.
If you want to play with Qubino temp sensor, be careful, there is direct connection from sensor gnd pin to AC live!
Hi, how did you get it visible? I'm trying to get the temperature sensor working on a Vera.
Hi, how did you get it visible? I'm trying to get the temperature sensor working on a Vera.
Replies have been locked on this page!