Nexa Pro WRR-1

Manuel shared this question 9 years ago
Answered

Hi, I got another problem while moving from Tellstick to Zipabox, I can't install my Nexa Pro WRR-1, anyone have a way to fix it?

Thanks.

Replies (12)

photo
1

Can you try by adding it as LCMR-1000?

photo
2

Sebastian Popovic wrote:

Can you try by adding it as LCMR-1000?
I tryed all the NEXA that are in the list without any success, when using the LCRM-1000 the Box says that it was registrated and added to the list but when I try setting ON or OFF it doesn't work, the WRR-1 doesn't react when pairing...

photo
1

Manuel wrote:

Sebastian Popovic wrote:

Can you try by adding it as LCMR-1000?
I tryed all the NEXA that are in the list without any success, when using the LCRM-1000 the Box says that it was registrated and added to the list but when I try setting ON or OFF it doesn't work, the WRR-1 doesn't react when pairing...
Hi Manuel, please contact us on support@zipato.com, we will take care about this issue.

photo
1

Wrr-1 pro is a 868mhz module, not a 433Mhz.

photo
1

Henrik Ljungberg wrote:

Wrr-1 pro is a 868mhz module, not a 433Mhz.
No, it is a 433Mhz as I had it connected to my Tellstick and can connect it to a LWST-615 wall switch, wich are 433Mhz.

photo
1

Ok..

I look at nexa homepage and the new wrr-1 is 433mhz, the old was 868mhz sorry.


Nexa said the the new 433mhz is not compatible with Nexa Gateway.

photo
1

Henrik Ljungberg wrote:

Ok..

I look at nexa homepage and the new wrr-1 is 433mhz, the old was 868mhz sorry.


Nexa said the the new 433mhz is not compatible with Nexa Gateway.

The strange thing is that I got it to work with Tellstick, it was a bit of a tricks but it worked, but now the Zipabox see it, register it but doesn't control it and the support can't help as it isn't supported....

photo
1

Hi again,

Now after several days getting crazy about my WRR-1 that starts every evening by his own, I found out that it was reacting at the same signal than another device from Zipabox, so now the question is how do I reprogram the other device so I get 2 different connection?

photo
1

I'm also interested in making the 433 WRR-1 work. I've tried to add it as LCMR-1000, but it does not respond.

photo
1

Excellent, thanks! :)

photo
1

I recently purchased the Zipabox Duo. I have a few WRR-1 (433MHz). Were you able to add this device? I can however not see it on the "add device" list.

photo
1

Thanks for adding the WRR-1 inte the list of compatible devices!!!

Replies have been locked on this page!