This object is in archive! 

Qubino Flush Dimmer

Jacob Wiqvist shared this question 7 years ago
Need Answer

http://qubino.com/products/flush-dimmer/I read on this homepage that Qubino have double tap function to go to 100% but it does not look like I have this. Is it possible to fix this in some way?


Parameter 21 or something?


If the dimmer needs a firmware update how do I fix that?

86807361ac15980efce9abd3329a1072


Best regards Jacob

Best Answer
photo

You could check if that parameter is available in the manual that came with the dimmer.

I was fighting with similar problems with Qubino dimmers, and found out that my dimmers had so old firmware that all the useful features were missing. I couldn't figure out any way to update the dimmer's firmware.

Replies (9)

photo
1

Dear Jacob,

as I can see from manual you can enable double click function.


Parameter no. 21 - Enable/Disable | Double click function

If Double click function is enabled, a fast double click on the

push button will set dimming power at maximum dimming value.

Available configuration parameters (data type is 1 Byte DEC):

-default value 0

-0 - double click disabled

-1 - double click enabled

photo
1

Like this?


d41f205ed9cbe2f3905c6f9e74abed9c

photo
1

Failed? Cant retrive from paramerter 21 size 1?

0be21e35cf716d444ecc079e424a2ede

photo
1

You could check if that parameter is available in the manual that came with the dimmer.

I was fighting with similar problems with Qubino dimmers, and found out that my dimmers had so old firmware that all the useful features were missing. I couldn't figure out any way to update the dimmer's firmware.

photo
1

Is there any way to update firmware?

photo
photo
1

Or if it is possible to buy a dongle that makes it possible to update any zwave device?

photo
1

Try without the size (leave it empty).

photo
1

No luck!

photo
photo
1

I think you have ZMNHDA2, this don't have this parameter.

On ZMNHDD1 (With Z-Wave Plus) have this parameter.


Erik

photo
1

Yes I think it is ZMNHDA2. Its a shame. You can't update to get new functions!

photo
photo
1

You need to send it to qubino for replacement. Get in touch with them and tell the problem. They should help.

Leave a Comment
 
Attach a file