This object is in archive! 

Inclusion of zipato RGBW bulb failed on Jeedom with openzwave

Alexis Guével shared this idea 3 years ago
Under Consideration

Hello,

Unfortunately after many trials I'm unable to include my zipato light bulb in my zwave network. Setup information :

- Jeedom v4.0.61 , dongle zwave usb badodosecurity wd6051, plugin openzwave v1.4

- zipato light bulb rgbw

steps I followed and results I get :

1. Controller in exclusion mode -> OK

2. I'm turning light bulb on -> message "exclusion of a device not in the network"

3. the controller close the exclusion mode (when I'm tapping it does not do anything ..)

4. Controller in inclusion mode -> OK

5. Turning on light bulb (when I'm tapping it does not do anything)

6. the controller close the inclusion mode right after I turned the zipato bulb ON

I joined some logs with this post, I see errors like this :

[2020-11-18 00:38:02][DEBUG] : zwcallback args=[{'controllerState': 'Failed', 'controllerError': 'None', 'controllerErrorInt': 0, 'notificationType': 'ControllerCommand', 'nodeId': 0, 'controllerStateInt': 8, 'controllerErrorDoc': 'None.', 'homeId': 3880691758L, 'controllerStateDoc': 'The command has failed.'}]

[2020-11-18 00:38:02][DEBUG] : Z-Wave ControllerCommand : {'controllerState': 'Failed', 'controllerError': 'None', 'controllerErrorInt': 0, 'notificationType': 'ControllerCommand', 'nodeId': 0, 'controllerStateInt': 8, 'controllerErrorDoc': 'None.', 'homeId': 3880691758L, 'controllerStateDoc': 'The command has failed.'}

[2020-11-18 00:38:02][INFO] : The command has failed. (Failed)

Also this in the other log fileatr thre same time, during the inclusion

2020-11-18 00:38:02.461 Info, FUNC_ID_ZW_ADD_NODE_TO_NETWORK:

2020-11-18 00:38:02.461 Info, ADD_NODE_STATUS_FAILED

2020-11-18 00:38:02.461 Detail, Removing current message

2020-11-18 00:38:02.461 Detail, contrlr, Queuing (Command) Add Node Stop: 0x01, 0x04, 0x00, 0x4a, 0x05, 0xb4

2020-11-18 00:38:02.462 Detail, Notification: ControllerCommand - Failed

Will appreciate some help ! I see my interface updating when I'm try to include it, and logs, so I guess something happening but somehow the bubl can not be added.

Thanks a lot

Regards

Replies (1)

photo
2

I suggest to address this problem in the openzwave community. Looks like the openzwave interface has not handled this bulb in a correct manner.

photo
1

Hello Alexis,


tapping on the bulb was not working with me, did you to tap on the bottom on your lamp like on this old post ? it worded for me on Jeedom

domotique34.com/ampoule-led-rgbw-de-zipato/

photo
Leave a Comment
 
Attach a file