Fibaro FGBS-222 Smart Implant - compatibility
There was a topic about the incompatibility of the Fibaro Smart Implant with zipato and I noticed it disappeared yesterday shortly after an interesting reaction was placed. This was the URL before it was removed.
@Zipato: why did the topic disappear?
Here is the content of that topic. Can anyone confirm that the last suggestion (not using secure inclusion) resolves the issue?
Fibaro FGBS-222 Smart Implant - compatibility
Aleksandr Syromiatnikov shared this thanks 3 months ago
Hi,
I am very frustrated with zipato compatibility.
I make successfull inclution of FGBS-222 Smart Implant, but it have wronge functionality.
In configuration of the device you can find INPUT1, INPUT2 and OUTPUT1, OUTPUT2 - it's correct.
But when you will go to Device Manager - Tree of devices - you will not find any information about INPUT1, INPUT2, OUTPUT1, OUTPUT2. In events no logs from inputs.
Support can't do nothing without sample of device.
I can´t understand - what dificult to adapt zipato software to popular and actual devices.
Files: config.jpg devices.jpg
Comments (11)
Henning ● 3 months ago
Hello Aleksandr. I was just thinking I should buy and test this new Fibaro Implant device.
Did you submit a ticket and explain your problem there? Did they reply they needed a physical demo for testing?
Have you tested to exclude and include your device again? Sometimes this is needed after changing parameters etc?
All the best! // Henning :)
Aleksandr Syromiatnikov ● 3 months ago
Hello, Henning
Yes I tried everything - the problem is wrong device structure and absence of data from INPUTS.
Response from support is: "Unfortunately without a sample we cannot do much more remotely in this case."
Best regards.
Aleksandr
Attila Hajdu ● 3 months ago
Hi, send the support this link. The implant is Zwave certified by the alliance
https://products.z-wavealliance.org/products/3285
So should not be a need to send a sample.
Aleksandr Syromiatnikov ● 3 months ago
"if you wish to have any Zipato specific functionality other than generic. We need a sample.
Otherwise. This ticket is closed."
Henning ● 3 months ago
Hi Aleksandr.
I have asked about this device in another ticket. They say they would need more detailed info to understand what is not working. I do not own an Implant device yet and I feel tempted NOT to buy one if it is not yet supported. :)
Can you please do one more attempt to explain ONE of the core functions that this device should have but is not working for you? Do not send them two, three or ten. Just send one single example and ask for support.
Maybe you had problems that the outputs was not possible to use and control as actuators? This was never possible with old Fibaro Binary sensor but should be possible with this new device according to the manual from Fibaro. Maybe you can use that as an example if it is not working for you?
I also think you should exclude and re-include the device and make sure it is still not working.
OK? Thanks! // Henning
Aleksandr Syromiatnikov ● 3 months ago
Hi, Henning.
"I also think you should exclude and re-include the device and make sure it is still not working."
I did it several times.
"Maybe you had problems that the outputs was not possible to use and control as actuators? This was never possible with old Fibaro Binary sensor but should be possible with this new device according to the manual from Fibaro. Maybe you can use that as an example if it is not working for you?"
No, I have problem with INPUT data. I already used old Fibaro Binary sensor - and I know about problem with OUTPUT. But in new Fibaro Smart Implant it's possible to control OUTPUT separately.
"Can you please do one more attempt to explain ONE of the core functions that this device should have but is not working for you? Do not send them two, three or ten. Just send one single example and ask for support."
I sent ONE example in One ticket. Only one function I miss in Fibaro Smart Implant is to have STATUS of INPUT.
Borna tried to guess which device is giving status of INPUT
Best regards!
Alex
Henning ● 3 months ago
OK. I guess it should have the inputs visible in a similar way as the old binary sensor and that this additionally functions with voltage etc should be also visible.
If the two ON/OFF inputs does not report their ON/OFF state the same way as the old Binary sensor I can't understand how this can be so difficult to figure out?
I will buy one and test soon. I hope. :)
// Henning
Henning ● 3 months ago
Hey Alex.
In my ticket about this I had a reply that they are trying to source a sample direct from Fibaro for testing.
So hopefully any missing functionality will be added soon.
I will let you know if I hear anything else or when I have tested myself.
// Henning
Aleksandr Syromiatnikov ● 3 months ago
Hi, Henning
Thank you very much.
I will be waiting for good news.
quizzical ● 27 days ago
Hi, any news on whether Zipato has made the Fibaro Smart Implant compatible with the zipabox now?
Henning ● 27 days ago
Hello. Unfortunately I had a note in my ticket that the testing (or actually sourcing of a test device from Fibaro) had been delayed so no progress as of yet.
I am soon ready to use one of these implants so maybe I buy one and send it to them.
// Henning
https://community.zipato.com/public/avatars/50x50_1625044724219531.jpeg" alt="50x50_1625044724219531" /> AP Please exclude and then include the device without secure inclusion. The problem is the secure mode. Zipato don't support them at this device. I don't know why.
Hi,
Fibaro Smart implant is in the progress of supporting. Thank you for your patience.
Kind regards,
Zipato Team
Hi,
Fibaro Smart implant is in the progress of supporting. Thank you for your patience.
Kind regards,
Zipato Team
Dear Paula,
Do you have any news on whether the Zipabox now supports the Fibaro Smart Implant?
Many thanks!
Dear Paula,
Do you have any news on whether the Zipabox now supports the Fibaro Smart Implant?
Many thanks!
Hello all.
I am sorry for slow info in this topic.
I did send a sample device to Zipato and after some months I recently had my demo device back.
I still haven't tested if it works as it should (according to the Fibaro manual) but I assume it does since I had the device sent back after such a long period of time.
Maybe we can ask Paula to comment, please?
I will test it soon and comment again!
All the best!
// Henning
Hello all.
I am sorry for slow info in this topic.
I did send a sample device to Zipato and after some months I recently had my demo device back.
I still haven't tested if it works as it should (according to the Fibaro manual) but I assume it does since I had the device sent back after such a long period of time.
Maybe we can ask Paula to comment, please?
I will test it soon and comment again!
All the best!
// Henning
Thanks Henning, patience is an important virtue when it comes to domotics ;-)
Thanks for testing it when you find the time.
Thanks Henning, patience is an important virtue when it comes to domotics ;-)
Thanks for testing it when you find the time.
I bought a new Smart Implant device and included in Zipabox but unfortunately it seems not properly supported by Zipato. I still have the same problems with the inputs not showing correct state.
Please Zipato give us some hints to correct set this device that is replacing the old Binary Sensor.
I bought a new Smart Implant device and included in Zipabox but unfortunately it seems not properly supported by Zipato. I still have the same problems with the inputs not showing correct state.
Please Zipato give us some hints to correct set this device that is replacing the old Binary Sensor.
Hello all. I finally had time and energy to test my Smart Implant device today but unfortunately I cannot get the 2 inputs to work!?
All I see is two voltage meters and no changes if I set to monostable or bistable switches in the configurations.
Has anyone manage to get this to work?
I have excluded and re included a few times and with secure inclusion turned off I get a message all is working.
// Henning
Hello all. I finally had time and energy to test my Smart Implant device today but unfortunately I cannot get the 2 inputs to work!?
All I see is two voltage meters and no changes if I set to monostable or bistable switches in the configurations.
Has anyone manage to get this to work?
I have excluded and re included a few times and with secure inclusion turned off I get a message all is working.
// Henning
1.3.116
1.3.116
I'm stuck at 1.3.98K
I'm stuck at 1.3.98K
Replies have been locked on this page!